Cheers dude It’s got an OCP1K pickup in it which although sounds nice is a pain in the ass as the saddle’s part of the unit . Think I’ve shaved an? sanded as much as I can outa the poxy thing :/.. Time I bought a dremmel…
10/4 buddy. I forgot and left a linseed oil paper towel on top of the garage? frig where I’d tossed it after treating a fretboard (I’d meant to burn it in the driveway but got sidetracked), and it apparently did a partial smolder burn and flame-out two weeks later. Yikes, I smelled it that morn and thought wtf is that. Cranked the overhead door open and the wind blew the ashes down.
hi dude. Just got an ovation celebrity deluxe cse44 cheap because the bridge is too high. Removed all the shims an straightened the neck but it’s? still high. The 2 ways i can think of are to cut the slot deeper an sand the top down or take it off an sand the bottom. Was wondering if you’d had any experience with korean ovations and knew what glue they’re stickin em down with?? I’d rather do the bottom cos there’s plenty of material to take off and it’d retain the original shape on top..
Remember NOT to leave rags soaked with linseed oil lying around, this is a huge fire hazard.? The rags may actually spontanuosly combust since the linseed oil oxidizes, and this is an exothermic reaction.
Yeah I’ve had a couple Ovations that? required that – problem is the repair did cost almosdt as much as the guitar – 3-4 frets pulled…fingerboard hand-leveled… fret slots re-sawed and frets replaced (with slightly lower profile frets…. Fixed it but was a costly job.
{ 25 comments… read them below or add one }
Thanks Mr Dave, I was asking myself? how to clean and keep my Takamine happy. These tips sound great. I like the show very much. Thanks for sharing.
Uh oh, I guess someone should tell B.B. King about that, he winds the entire string and never goes out? of tune
1:33 Sounds? like a sitar!
ok
show? your video and the physics behind your claim
that is the worst possible way to string a guitar the more winding you have the more trouble you will have to keep it? in tune
Thanks!!!?
Thats what the “pause”? button is for.
Cheers dude
It’s got an OCP1K pickup in it which although sounds nice is a pain in the ass as the saddle’s part of the unit
. Think I’ve shaved an? sanded as much as I can outa the poxy thing :/.. Time I bought a dremmel…
You can buy The One at Guitar? Center. It’s not just online.
actually? less .015 thick
10/4 buddy. I forgot and left a linseed oil paper towel on top of the garage? frig where I’d tossed it after treating a fretboard (I’d meant to burn it in the driveway but got sidetracked), and it apparently did a partial smolder burn and flame-out two weeks later. Yikes, I smelled it that morn and thought wtf is that. Cranked the overhead door open and the wind blew the ashes down.
Was a credit card thickness plastic shim sufficient under the? saddle?
lighter fluid or simple green? or both
I would shave? the top and the saddle
that is standard practise on a stable well glued bridge
bridge removal my not be easy
I’ll? be getting one soon
Dave, do you want a? new bottle of Linseed oil?
hi dude. Just got an ovation celebrity deluxe cse44 cheap because the bridge is too high. Removed all the shims an straightened the neck but it’s? still high. The 2 ways i can think of are to cut the slot deeper an sand the top down or take it off an sand the bottom. Was wondering if you’d had any experience with korean ovations and knew what glue they’re stickin em down with?? I’d rather do the bottom cos there’s plenty of material to take off and it’d retain the original shape on top..
Remember NOT to leave rags soaked with linseed oil lying around, this is a huge fire hazard.? The rags may actually spontanuosly combust since the linseed oil oxidizes, and this is an exothermic reaction.
Naa no shares…. he just uses it for wanking on the bench which is no good now as his new Mic? picks up his every movement……. haar haar…:)
Yeah I’ve had a couple Ovations that? required that – problem is the repair did cost almosdt as much as the guitar – 3-4 frets pulled…fingerboard hand-leveled… fret slots re-sawed and frets replaced (with slightly lower profile frets…. Fixed it but was a costly job.
What? would you recommend on a maple neck?
Tell yer? neighbor to move out so we can be neighbors!
Party at Kel’s
Excellent work? Dave!
I like the kink. ? I like the under-wind, too.
i guess its just the linseed oil i have but it makes the fretboard? smell kinda like fish.